Stainless-T-Drivers

Metric Sizes

Fractional Sizes

SMT12-3 - 3mm x 12" Lg Shown)

Machined from 17-4 SS Heat Treated to RC-48, Chem-polished finish.

Metric Sizes: 2mm - 19mm

6in.Lg

12in.Lg

18in.Lg

ST6-12 5/8 x 6" Lg (Shown)

Machined from 17-4 SS Heat Treated to RC-48, Chem-polished finish.

Fractional Sizes: 5/65 - 3/4

6in.Lg

12in.Lg

18in.Lg

Note: This one-piece cushioned grip "T" handle driver is constructed of a round shank of 17-4 stainless steel with the hex machined on the end and is heat treated to R/C 45-48,

17-4PH is a martensitic precipitation hardening alloy which offers high strength and hardness while maintaining excellent corrosion resistant properties. In this it surpasses the 400 series, more closely resembling the corrosion resistant properties of type 304.

Type analysis of 17-4PH stainless steel
Carbon 0.07% max.	Manganese 1.00% max	Phosphorus 0.040% max
Sulfur 0.030% max	Silicon 1.00% max	Chromium 15.00/17.50%
Nickel 3.00/5.00%	Copper 3.00/5.00%	Columbium & Tantalum 0.15/0.45%

416 stainless Corrosion Resistance:
Useful resistance to dry atmospheres, fresh water and mild alkalies and acids, but less resistant than the equivalent non-free-machining grades. Less corrosion resistant than the austenitic grades and also less than 17% chromium ferritic alloys such as Grade 430. High sulphur content free machining grades such as 416 are totally unsuitable for marine or other chloride exposure

Fractional Sizes Note: Fractional sizes have a Red plastic coated cushion grip handle.				6" Lg.	12" Lg.	12" Lg.
Hex Size	Top Handle Width	Shank Dia.	Max. Torque (ft.-lbs)	Part No.	Part No.	Part No.
5/64	4"	1/4	.8	ST6-5/64	ST12-5/64	ST18-5/64
3/32	4"	1/4	1.25	ST6-3/32	ST12-3/32	ST18-3/32
7/64	4"	1/4	2.5	ST6-1	ST12-1	ST18-1
1/8	4"	1/4	3.75	ST6-2	ST12-2	ST18-2
9/64	4"	1/4	5	ST6-3	ST12-3	ST18-3
5/32	4"	1/4	10	ST6-4	ST12-4	ST18-4
3/16	4"	1/4	18	ST6-5	ST12-5	ST18-5
7/32	4"	5/16	30	ST6-6	ST12-6	ST18-6
1/4	4"	5/16	34	ST6-7	ST12-7	ST18-7
5/16	4 1/2"	3/8	45	ST6-8	ST12-8	ST18-8
3/8	6"	7/16	n/a	ST6-9	ST12-9	ST18-9
7/16	9"	1/2	n/a	ST6-7/16	ST12-7/16	ST18-7/16
1/2	9"	5/8	n/a	ST6-10	ST12-10	ST18-10
9/16	10"	3/4	n/a	ST6-11	ST12-11	ST18-11
5/8	10 1/2"	3/4	n/a	ST6-12	ST12-12	ST18-12
3/4	11"	7/8	n/a	ST6-13	ST12-13	ST18-13

Metric Stainless 'T' Driver Torque Specifications & Lengths

Metric Sizes Note: Metric sizes have a blue plastic coated cushion grip handle.				6" Lg.	12" Lg.	18" Lg.
Hex Size	Top Handle Width	Shank Dia.	Max. Torque (ft-lbs)	Part No.	Part No.	Part No.
2mm	4"	1/4	.8	SMT6-1	SMT12-1	SMT18-1
2.5mm	4"	1/4	2.5	SMT6-2	SMT12-2	SMT18-2
3mm	4"	1/4	4	SMT6-3	SMT12-3	SMT18-3
4mm	4"	1/4	10	SMT6-4	SMT12-4	SMT18-4
5mm	4.5	1/4	24	SMT6-5	SMT12-5	SMT18-5
6mm	5"	5/16	28	SMT6-6	SMT12-6	SMT18-6
7mm	5"	5/16	30	SMT6-7	SMT12-7	SMT18-7
8mm	6"	3/8	45	SMT6-8	SMT12-8	SMT18-8
9mm	7"	3/8	n/a	SMT6-9	SMT12-9	SMT18-9
10mm	7"	1/2	n/a	SMT6-10	SMT12-10	SMT18-10
11mm	7"	1/2	n/a	SMT6-11	SMT12-11	SMT18-11
12mm	8"	9/16	n/a	SMT6-12	SMT12-12	SMT18-12
13mm	10"	5/8	n/a	SMT6-13	SMT12-13	SMT18-13
14mm	10"	3/4	n/a	SMT6-14	SMT12-14	SMT18-14
15mm	10"	3/4	n/a	SMT6-15	SMT12-15	SMT18-15
16mm	11"	3/4	n/a	SMT6-16	SMT12-16	SMT18-16
17mm	11"	7/8	n/a	SMT6-17	SMT12-17	SMT18-17
18mm	11"	7/8	n/a	SMT6-18	SMT12-18	SMT18-18
19mm	11"	7/8	n/a	SMT6-19	SMT12-19	SMT18-19